What size utility trailer do you need to haul a riding mower?
By My Yard Editorial Team · 7/28/2026
The Quick Answer
A 5x8 or 5x10 trailer with a 2,990–3,500 lb GVWR handles most riding mowers. Measure your deck width plus 12 inches of clearance and confirm the ramp gate is rated for the machine's weight.
The Witty Breakdown
Zero turns are wider than people assume — a 54-inch deck needs a trailer with at least 60 inches between the fenders.
Check your tow vehicle's rating too, including tongue weight, not just total capacity.
Step-by-Step Fix
- 1
Measure the mower's widest point and total weight from the manual.
- 2
Choose a trailer with a flat, low-angle ramp; steep ramps high-center mowers.
- 3
Confirm trailer GVWR exceeds mower weight plus trailer weight.
- 4
Use four tie-down points and chock the wheels.
Pro-Tip / Do Not Do This
Don't strap a mower down by the roll bar alone. Use the frame — roll bars bend and mowers walk right off.
Was this helpful?
Related Guides
Community Comments
No comments yet — be the first neighbor to weigh in.